Pool Maintenance

For pool maintenance services, look no further than AquaTech Pool and Spa Solutions. Routine pool care is a must for preventing or catching a mechanical fault early before it becomes a costly and inconvenient problem.

 

Pool maintenance is an essential factor in any home or commercial pool, without such the pools equipment and lifespan will shorten also making the pool unpleasant for anyone wanting to swim in it.

 

This consists of many important factors to make sure all the aspects of the pool are running correctly.

Some of the things we take care of :

 

    • Replacing of pool pump mechanical seals – We recommend replacing pool pump mechanical seals every 3-4 years to prevent water leaking from the wet end to the pump motor. Failing to do so can lead to your pool pump rusting and damaging the motor.
    • Checking of valves and o-rings – Valves and o-rings should be tested for wear and tear, as well as for pump, filter, and chlorinator barrel union connections. These problems can lead to suction and leaking issues in the filtration system.
    • Replacing of filter media – As part of our spa and pool care services, we recommend that sand is replaced every 5-6 years. As sand wears down over time, it may no longer filter out the fine particles. This can cause cloudy water or accumulate bacteria or oils from lotions, that backwashing can longer get rid of. We recommend cartridge filter elements should be every 2-3 years for optimum water filtration.
    • Maintaining Automatic pool dosing systems – Acid pump squeeze tubes must be lubricated every six months, or more often in commercial applications. Depending upon usage, the squeeze tubes may require replacement after 12 months on a domestic installation, and earlier on a commercial installation. The sensors are sensitive instruments, so to maintain their accuracy they should be cleaned periodically. The chlorine sensor tip can be contaminated (generally observed by a copper or brownish coating – this should always look shiny gold) which will give a false reading to the controller, causing no dosing/over-dosing of chlorine. As the pH sensor tip is made of glass, a hairline crack can cause the sensor to read incorrectly causing malfunction.
    • Replacing pool motor – Over time the pump motor can stop working and as a primary fix we can replace the pump motor with a new one which runs via solar, gas or electricity.
    • Fixing your Zodiac pool cleaner problems – Experiencing problems with your Zodiac pool cleaner? Let us take a look.
    • Repairing general and other pool equipment – We can take a look and repair general and other less common pool equipment.

Making sure our pool is well cared for so we can reduce the time it takes to clean our pool in the future.

Servicing
ENQUIRE NOW

    ENQUIRE NOW

    Please fill out the form and we will get back to you -Check out our service locations